Java教程
windows配置skywalking集群
本文主要是介绍windows配置skywalking集群，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！
一、zookeeper
准备配置三个zookeeper，因为我是单台模拟，所以需要使用不同的端口，使用版本是apache-zookeeper-3.6.3-bin （必须是3.5+）
1、第1个zookeeper
vi conf/zoo.cfg
修改 dataDir 带指定目录下的
# The number of milliseconds of each tick tickTime=2000 # The number of ticks that the initial # synchronization phase can take initLimit=10 # The number of ticks that can pass between # sending a request and getting an acknowledgement syncLimit=5 # the directory where the snapshot is stored. # do not use /tmp for storage, /tmp here is just # example sakes. dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper # the port at which the clients will connect clientPort=2181 # the maximum number of client connections. # increase this if you need to handle more clients #maxClientCnxns=60 # # Be sure to read the maintenance section of the # administrator guide before turning on autopurge. # # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance # # The number of snapshots to retain in dataDir #autopurge.snapRetainCount=3 # Purge task interval in hours # Set to "0" to disable auto purge feature #autopurge.purgeInterval=1 ## Metrics Providers # # https://prometheus.io Metrics Exporter #metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider #metricsProvider.httpPort=7000 #metricsProvider.exportJvmInfo=true server.1=127.0.0.1:3888:2888 server.2=127.0.0.1:3788:2788 server.3=127.0.0.1:3688:2688
在这个对应的tmp\zookeeper 生成一个myid 里面的值是 1
可以用命令生成
echo 1 >目录/myid
2、第2个zookeeper
vi conf/zoo.cfg
修改 dataDir 带指定目录下的
修改 clientPort 、dataDir ，新增
server.1=127.0.0.1:3888:2888 server.2=127.0.0.1:3788:2788 server.3=127.0.0.1:3688:2688
# The number of milliseconds of each tick tickTime=2000 # The number of ticks that the initial # synchronization phase can take initLimit=10 # The number of ticks that can pass between # sending a request and getting an acknowledgement syncLimit=5 # the directory where the snapshot is stored. # do not use /tmp for storage, /tmp here is just # example sakes. dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin-2\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper # the port at which the clients will connect clientPort=2182 # the maximum number of client connections. # increase this if you need to handle more clients #maxClientCnxns=60 # # Be sure to read the maintenance section of the # administrator guide before turning on autopurge. # # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance # # The number of snapshots to retain in dataDir #autopurge.snapRetainCount=3 # Purge task interval in hours # Set to "0" to disable auto purge feature #autopurge.purgeInterval=1 ## Metrics Providers # # https://prometheus.io Metrics Exporter #metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider #metricsProvider.httpPort=7000 #metricsProvider.exportJvmInfo=true server.1=127.0.0.1:3888:2888 server.2=127.0.0.1:3788:2788 server.3=127.0.0.1:3688:2688
2.2
在这个对应的tmp\zookeeper 生成一个myid 里面的值是 2
可以用命令生成
echo 2 >目录/myid
3、第3台zookeeper
vi conf/zoo.cfg
修改 dataDir 带指定目录下的
修改 clientPort 、dataDir ，新增
server.1=127.0.0.1:3888:2888 server.2=127.0.0.1:3788:2788 server.3=127.0.0.1:3688:2688
# The number of milliseconds of each tick tickTime=2000 # The number of ticks that the initial # synchronization phase can take initLimit=10 # The number of ticks that can pass between # sending a request and getting an acknowledgement syncLimit=5 # the directory where the snapshot is stored. # do not use /tmp for storage, /tmp here is just # example sakes. dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin-3\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper # the port at which the clients will connect clientPort=2183 # the maximum number of client connections. # increase this if you need to handle more clients #maxClientCnxns=60 # # Be sure to read the maintenance section of the # administrator guide before turning on autopurge. # # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance # # The number of snapshots to retain in dataDir #autopurge.snapRetainCount=3 # Purge task interval in hours # Set to "0" to disable auto purge feature #autopurge.purgeInterval=1 ## Metrics Providers # # https://prometheus.io Metrics Exporter #metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider #metricsProvider.httpPort=7000 #metricsProvider.exportJvmInfo=true server.1=127.0.0.1:3888:2888 server.2=127.0.0.1:3788:2788 server.3=127.0.0.1:3688:2688
3.2
在这个对应的tmp\zookeeper 生成一个myid 里面的值是 3
可以用命令生成
echo 3 >目录/myid
二、elasticsearch 集群
准备单台电脑部署三个集群，使用的 elasticsearch-7.6.1-windows-x86_64 版本
1、 第1个，修改 config/elasticsearch.yml
设置node-1为主节点，另外设置可以跨域访问
# ======================== Elasticsearch Configuration ========================= # # NOTE: Elasticsearch comes with reasonable defaults for most settings. # Before you set out to tweak and tune the configuration, make sure you # understand what are you trying to accomplish and the consequences. # # The primary way of configuring a node is via this file. This template lists # the most important settings you may want to configure for a production cluster. # # Please consult the documentation for further information on configuration options: # https://www.elastic.co/guide/en/elasticsearch/reference/index.html # # ---------------------------------- Cluster ----------------------------------- # # Use a descriptive name for your cluster: # cluster.name: esapp # # ------------------------------------ Node ------------------------------------ # # Use a descriptive name for the node: # node.name: node-1 node.master: true node.data: true # # Add custom attributes to the node: # #node.attr.rack: r1 # # ----------------------------------- Paths ------------------------------------ # # Path to directory where to store the data (separate multiple locations by comma): # #path.data: /path/to/data # # Path to log files: # #path.logs: /path/to/logs # # ----------------------------------- Memory ----------------------------------- # # Lock the memory on startup: # #bootstrap.memory_lock: true # # Make sure that the heap size is set to about half the memory available # on the system and that the owner of the process is allowed to use this # limit. # # Elasticsearch performs poorly when the system is swapping the memory. # # ---------------------------------- Network ----------------------------------- # # Set the bind address to a specific IP (IPv4 or IPv6): # network.host: 0.0.0.0 # # Set a custom port for HTTP: # http.port: 9200 transport.port: 9300 # # For more information, consult the network module documentation. # # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when this node is started: # The default list of hosts is ["127.0.0.1", "[::1]"] # discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"] # # Bootstrap the cluster using an initial set of master-eligible nodes: # cluster.initial_master_nodes: ["node-1"] # # For more information, consult the discovery and cluster formation module documentation. # # ---------------------------------- Gateway ----------------------------------- # # Block initial recovery after a full cluster restart until N nodes are started: # #gateway.recover_after_nodes: 3 # # For more information, consult the gateway module documentation. # # ---------------------------------- Various ----------------------------------- # # Require explicit names when deleting indices: # #action.destructive_requires_name: true http.cors.enabled: true http.cors.allow-origin: "*"
2、 第2个，修改 config/elasticsearch.yml
# ======================== Elasticsearch Configuration ========================= # # NOTE: Elasticsearch comes with reasonable defaults for most settings. # Before you set out to tweak and tune the configuration, make sure you # understand what are you trying to accomplish and the consequences. # # The primary way of configuring a node is via this file. This template lists # the most important settings you may want to configure for a production cluster. # # Please consult the documentation for further information on configuration options: # https://www.elastic.co/guide/en/elasticsearch/reference/index.html # # ---------------------------------- Cluster ----------------------------------- # # Use a descriptive name for your cluster: # cluster.name: esapp # # ------------------------------------ Node ------------------------------------ # # Use a descriptive name for the node: # node.name: node-2 node.master: false node.data: true # # Add custom attributes to the node: # #node.attr.rack: r1 # # ----------------------------------- Paths ------------------------------------ # # Path to directory where to store the data (separate multiple locations by comma): # #path.data: /path/to/data # # Path to log files: # #path.logs: /path/to/logs # # ----------------------------------- Memory ----------------------------------- # # Lock the memory on startup: # #bootstrap.memory_lock: true # # Make sure that the heap size is set to about half the memory available # on the system and that the owner of the process is allowed to use this # limit. # # Elasticsearch performs poorly when the system is swapping the memory. # # ---------------------------------- Network ----------------------------------- # # Set the bind address to a specific IP (IPv4 or IPv6): # network.host: 0.0.0.0 # # Set a custom port for HTTP: # http.port: 9202 transport.port: 9302 # # For more information, consult the network module documentation. # # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when this node is started: # The default list of hosts is ["127.0.0.1", "[::1]"] # discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"] # # Bootstrap the cluster using an initial set of master-eligible nodes: # cluster.initial_master_nodes: ["node-1"] # # For more information, consult the discovery and cluster formation module documentation. # # ---------------------------------- Gateway ----------------------------------- # # Block initial recovery after a full cluster restart until N nodes are started: # #gateway.recover_after_nodes: 3 # # For more information, consult the gateway module documentation. # # ---------------------------------- Various ----------------------------------- # # Require explicit names when deleting indices: # #action.destructive_requires_name: true http.cors.enabled: true http.cors.allow-origin: "*"
3、 第3个，修改 config/elasticsearch.yml
# ======================== Elasticsearch Configuration ========================= # # NOTE: Elasticsearch comes with reasonable defaults for most settings. # Before you set out to tweak and tune the configuration, make sure you # understand what are you trying to accomplish and the consequences. # # The primary way of configuring a node is via this file. This template lists # the most important settings you may want to configure for a production cluster. # # Please consult the documentation for further information on configuration options: # https://www.elastic.co/guide/en/elasticsearch/reference/index.html # # ---------------------------------- Cluster ----------------------------------- # # Use a descriptive name for your cluster: # cluster.name: esapp # # ------------------------------------ Node ------------------------------------ # # Use a descriptive name for the node: # node.name: node-3 node.master: false node.data: true # # Add custom attributes to the node: # #node.attr.rack: r1 # # ----------------------------------- Paths ------------------------------------ # # Path to directory where to store the data (separate multiple locations by comma): # #path.data: /path/to/data # # Path to log files: # #path.logs: /path/to/logs # # ----------------------------------- Memory ----------------------------------- # # Lock the memory on startup: # #bootstrap.memory_lock: true # # Make sure that the heap size is set to about half the memory available # on the system and that the owner of the process is allowed to use this # limit. # # Elasticsearch performs poorly when the system is swapping the memory. # # ---------------------------------- Network ----------------------------------- # # Set the bind address to a specific IP (IPv4 or IPv6): # network.host: 0.0.0.0 # # Set a custom port for HTTP: # http.port: 9203 transport.port: 9303 # # For more information, consult the network module documentation. # # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when this node is started: # The default list of hosts is ["127.0.0.1", "[::1]"] # discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"] # # Bootstrap the cluster using an initial set of master-eligible nodes: # cluster.initial_master_nodes: ["node-1"] # # For more information, consult the discovery and cluster formation module documentation. # # ---------------------------------- Gateway ----------------------------------- # # Block initial recovery after a full cluster restart until N nodes are started: # #gateway.recover_after_nodes: 3 # # For more information, consult the gateway module documentation. # # ---------------------------------- Various ----------------------------------- # # Require explicit names when deleting indices: # #action.destructive_requires_name: true http.cors.enabled: true http.cors.allow-origin: "*"
三、apache-skywalking-apm
1、 设置第1台，apache-skywalking-apm
1.1修改 config/application.yml
cluster.selector 设置为zookeeper
修改cluster.zookeeper.namespace 和 cluster.zookeeper.hostPort
cluster:
selector: ${SW_CLUSTER:zookeeper}
standalone:
# Please check your ZooKeeper is 3.5+, However, it is also compatible with ZooKeeper 3.4.x. Replace the ZooKeeper 3.5+
# library the oap-libs folder with your ZooKeeper 3.4.x library.
zookeeper:
namespace: ${SW_NAMESPACE:"skywalking"}
#hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181}
hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181,localhost:2182,localhost:2183}
设置 storage.selector 为 elasticsearch （我这个版本的apm及时使用elasticsearch7也是设置这个）
修改storage.elasticsearch.namespace 和storage.elasticsearch.clusterNodes
storage:
selector: ${SW_STORAGE:elasticsearch}
elasticsearch:
namespace: ${SW_NAMESPACE:"esapp"}
clusterNodes: ${SW_STORAGE_ES_CLUSTER_NODES:localhost:9200,localhost:9202,localhost:9203}
1.2 修改webapp/webapp.yml
修改 server.port 的端口为8090(因为8080已被其它程序占用)
server: port: 8090
2、 设置第2台，apache-skywalking-apm
2.1 修改 config/application.yml
cluster.selector 设置为zookeeper
修改cluster.zookeeper.namespace 和 cluster.zookeeper.hostPort
cluster:
selector: ${SW_CLUSTER:zookeeper}
standalone:
# Please check your ZooKeeper is 3.5+, However, it is also compatible with ZooKeeper 3.4.x. Replace the ZooKeeper 3.5+
# library the oap-libs folder with your ZooKeeper 3.4.x library.
zookeeper:
namespace: ${SW_NAMESPACE:"skywalking"}
#hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181}
hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181,localhost:2182,localhost:2183}
设置 storage.selector 为 elasticsearch （我这个版本的apm及时使用elasticsearch7也是设置这个）
修改storage.elasticsearch.namespace 和storage.elasticsearch.clusterNodes
storage:
selector: ${SW_STORAGE:elasticsearch}
elasticsearch:
namespace: ${SW_NAMESPACE:"esapp"}
clusterNodes: ${SW_STORAGE_ES_CLUSTER_NODES:localhost:9200,localhost:9202,localhost:9203}
设置core.default.restPort 为 22800 和core.default.gRPCPort 为 21800
core:
selector: ${SW_CORE:default}
default:
# Mixed: Receive agent data, Level 1 aggregate, Level 2 aggregate
# Receiver: Receive agent data, Level 1 aggregate
# Aggregator: Level 2 aggregate
role: ${SW_CORE_ROLE:Mixed} # Mixed/Receiver/Aggregator
restHost: ${SW_CORE_REST_HOST:0.0.0.0}
restPort: ${SW_CORE_REST_PORT:22800}
restContextPath: ${SW_CORE_REST_CONTEXT_PATH:/}
restMinThreads: ${SW_CORE_REST_JETTY_MIN_THREADS:1}
restMaxThreads: ${SW_CORE_REST_JETTY_MAX_THREADS:200}
restIdleTimeOut: ${SW_CORE_REST_JETTY_IDLE_TIMEOUT:30000}
restAcceptorPriorityDelta: ${SW_CORE_REST_JETTY_DELTA:0}
restAcceptQueueSize: ${SW_CORE_REST_JETTY_QUEUE_SIZE:0}
httpMaxRequestHeaderSize: ${SW_CORE_HTTP_MAX_REQUEST_HEADER_SIZE:8192}
gRPCHost: ${SW_CORE_GRPC_HOST:0.0.0.0}
gRPCPort: ${SW_CORE_GRPC_PORT:21800}
2.2 修改webapp/webapp.yml
修改 server.port 的端口为8090(因为8080已被其它程序占用)
server: port: 8091
四、java 设置agent代理 （apache-skywalking-java-agent-8.8.0）
-javaagent:H:\ruanjian\apache-skywalking-java-agent-8.8.0\skywalking-agent\skywalking-agent.jar -Dskywalking.agent.service_name=Your_ApplicationName -Dskywalking.collector.backend_service=127.0.0.1:11800,127.0.0.1:21800
这篇关于windows配置skywalking集群的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！
您可能喜欢
-
Java创业学习：初学者的全面指南11-22
-
JAVA创业学习：零基础入门到实战应用教程11-22
-
Java创业学习：从零开始的Java编程入门教程11-22
-
Java对接阿里云智能语音服务学习教程11-22
-
JAVA对接阿里云智能语音服务学习教程11-22
-
Java对接阿里云智能语音服务学习教程11-22
-
Java副业学习：零基础入门到实战项目11-22
-
Java副业学习：零基础入门指南11-22
-
Java微服务学习：入门与实践指南11-22
-
JAVA项目部署学习：从入门到实践11-22
-
Java项目部署学习：初学者指南11-22
-
Java项目部署学习：新手入门指南11-22
-
JAVA项目开发学习：新手入门与实践指南11-22
-
Java项目开发学习：初学者完全指南11-22
-
Java项目开发学习：从入门到初级实战11-22
栏目导航
