1. 编译安装 meshctl

在原先bluez的工程下

./configure --prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc --localstatedir=/var --enable-mesh
make -j8

有时候会出现以下错误

概率是编译器不能正常识别该变量,改改,通过即可.

查询版本,还是老版本.安装下

sudo make install

接下来就是执行下面这个指令启动 meshctl 

➜  tools ./meshctl --config mesh

修复此问题,将json复制到环境变量中

sudo cp local_node.json  /home/***/.config/meshctl/
sudo cp prov_db.json /home/***/.config/meshctl/

运行通过.

2 扫描连接 sigmesh 灯

进入meshctl 环境

meshctl

输入  discover-unprovisioned on  命令会自动搜索周围未配置的 sig mesh 设备

[meshctl]# discover-unprovisioned on
SetDiscoveryFilter success
Discovery started
Adapter property changed 
[
CHG
] Controller A0:D3:7A:DD:18:D1 Discovering: yes
        Mesh Provisioning Service (00001827-0000-1000-8000-00805f9b34fb)
            Device UUID: dc234e9d0cc550156b657964396b3471
            OOB: 0000
[
NEW
] Device DC:23:4E:9D:0C:C5 DC-23-4E-9D-0C-C5

用下列命令将配网安全等级设置为0：(从涂鸦IOT平台上创建的灯采用的认证机制是：no oob)

[meshctl]# security 0
Provision Security Level set to 0 (low)

然后调用 provision 对设备进行连接配置：(其中 Composition data 就是该节点的配置信息)

[meshctl]# provision dc234e9d0cc550156b657964396b3471
Trying to connect Device DC:23:4E:9D:0C:C5 DC-23-4E-9D-0C-C5
Adapter property changed 
[
CHG
] Controller A0:D3:7A:DD:18:D1 Discovering: no
Connection successful
Service added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0008
Service added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service000d
Service added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0011
Char added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0011/char0012:
Char added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0011/char0016:
Service added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service001a
Char added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service001a/char001b:
Char added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service001a/char001f:
Service added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0023
Service added /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0027
Services resolved yes
Found matching char: path /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0011/char0016, uuid 00002adb-0000-1000-8000-00805f9b34fb
Found matching char: path /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0011/char0012, uuid 00002adc-0000-1000-8000-00805f9b34fb
Start notification on /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0011/char0012
Characteristic property changed /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service0011/char0012
AcquireNotify success: fd 7 MTU 250
Notify for Mesh Provisioning Out Data started
Open-Node: 0x55ca07d0c530
Open-Prov: 0x55ca07d2a5d0
Open-Prov: proxy 0x55ca07d1fb00
Initiated provisioning
..................
Mesh session is open
Characteristic property changed /org/bluez/hci0/dev_DC_23_4E_9D_0C_C5/service001a/char001f
AcquireWrite success: fd 8 MTU 250
GATT-TX:     02 f4 9e 64 99 fe 13 cd c8 9b 0e 1c e5 61 82 cc 
GATT-TX:     ab f5 83 70 
GATT-TX:     00 f4 b2 38 02 d1 dc 42 cd 7a 74 ff fa 2d 4f c6 
GATT-TX:     a3 0b b0 be 8f 0c 
GATT-RX:     02 f4 03 5c 17 8b 92 47 bc 72 2c 1f 9f 82 e8 9d 
GATT-RX:     2e 13 13 a1 cf 11 
Proxy Accept list filter length: 0
GATT-RX:     00 f4 f5 58 82 02 78 6f 73 eb 26 5e 76 fc 93 6c 
GATT-RX:     ad 89 c4 76 96 51 76 42 a1 1f 60 9e 3d 05 
GATT-RX:     00 f4 82 bd 50 bd 97 e2 d2 f1 82 8b af 33 59 46 
GATT-RX:     97 82 f6 63 6c eb 05 36 a9 4a 0f bb b1 88 
GATT-RX:     00 f4 64 44 dd b4 81 03 55 07 8e 2a a8 66 a4 ea 
GATT-RX:     1b 62 02 c2 d0 2a d7 b8 28 98 db b7 a8 7b 
GATT-RX:     00 f4 e6 a5 23 e0 d3 d3 04 b1 4c 91 ed 32 b7 f6 
GATT-RX:     d4 f5 56 ad 8b 79 2f 4e 7b c7 47 1e e3 6f 
GATT-RX:     00 f4 4e 5d 88 52 22 a5 73 18 35 e9 84 1f 03 ad 
GATT-RX:     23 43 e7 b4 8c e1 e9 01 
GATT-TX:     00 f4 2b 62 8c 1e e2 d1 65 31 1d 78 04 28 5d 16 
GATT-TX:     b2 b8 7f fe 21 62 32 b5 f3 
[SigMesh-Node-0100]# 

使用  menu config  进入子目录，使用  target 0100  选择当前要配置的节点为  0100 ；

用  netkey-add 0  给设备配置第0个网络秘钥，使用  appkey-add 1  给设备配置第1个应用级别秘钥 (网络秘钥和APP秘钥是 mesh 规范中要求的，该秘钥可以在  meshctl  主页菜单执行  mesh-info  看到)；

最后用  bind 0 1 1000  实现将  model:1000  绑定（绑定时采用net-key 0,app-key 1）
ps： 订阅与发布是 sig mesh 实现联动控制的机制，每一个事件和动作都抽象为 model，比如：onoff model 就是规定开关逻辑的模型，其 id 也是规定死的： 0x1000

[SigMesh-Node-0100]# menu config
[SigMesh-Node-0100]# target 0100
[config: Target = 0100]# netkey-add 0
[config: Target = 0100]# appkey-add 1
[config: Target = 0100]# bind 0 1 1000

从 config 子菜单返回，进入 onoff 子菜单，然后选择目标 0100，之后就可以用 onoff 命令来实现控制了：（之后如果再次打开 meshctl，只需要调用 connect 0 0100 即可实现再次连接）

[config: Target = 0100]# back
[config: Target = 0100]# menu onoff 
[config: Target = 0100]# target 0100
[on/off: Target = 0100]# onoff 0
[on/off: Target = 0100]# onoff 1