Ceph集群搭建记录

本文主要是介绍Ceph集群搭建记录，对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！

环境准备

基础环境

node00	192.168.247.144	node00
node01	192.168.247.135	node01
node02	192.168.247.143	node02

vmare在分配IP没有连续，没有关系继续吧

配置免密登录

修改主机名称

hostnamectl set-hostname node00
hostnamectl set-hostname node01
hostnamectl set-hostname node02

编辑hosts文件

[root@linux30 ~]# vi /etc/hosts
192.168.247.144	node00
192.168.247.135	node01
192.168.247.143	node02

官方建议不用系统内置用户，创建名为ceph_user用户，密码也设为123456：

useradd -d /home/ceph_user -m ceph_user
passwd ceph_user
# 设置root 权限
echo "ceph_user ALL = (root) NOPASSWD:ALL" | sudo tee /etc/sudoers.d/ceph_user
sudo chmod 0440 /etc/sudoers.d/ceph_user

生成密钥：切换用户： su ceph_user 执行ssh-keygen，一直按默认提示点击生成RSA密钥信息。
分发密钥至各机器节点

ssh-copy-id ceph_user@node00
ssh-copy-id ceph_user@node01
ssh-copy-id ceph_user@node02

修改管理节点上的 ~/.ssh/config 文件，简化SSH远程连接时的输入信息：管理节点是会有root和ceph_user多个用户， ssh远程连接默认会以当前用户身份进行登陆，如果我们是root身份进行远程连接，还是需要输入密码，我们想简化，该怎么处理？

su root
vim /root/.ssh/config

复制一下内容即可

Host node00
   Hostname node00
   User ceph_user
Host node01
   Hostname node01
   User ceph_user
Host node02
   Hostname node02
   User ceph_user

注意修改文件权限，不能采用777最大权限：

chmod 600 ~/.ssh/config

NTP时间工具同步

# 下载
yum install ntp ntpdate ntp-doc -y

# 确保时区是正确， 设置开机启动：
systemctl enable ntpd

# 将时间每隔1小时自动校准同步。编辑 vi /etc/rc.d/rc.local 追加：
echo "/usr/sbin/ntpdate ntp1.aliyun.com > /dev/null 2>&1; /sbin/hwclock -w" >> /etc/rc.d/rc.local

# 配置定时任务,  执行crontab -e 加入
crontab -e 0 */1 * * * ntpdate ntp1.aliyun.com > /dev/null 2>&1; /sbin/hwclock -w

ceph的镜像加速源头设置

rpm -ivh https://mirrors.aliyun.com/ceph/rpm-mimic/el7/noarch/ceph-release-1-1.el7.noarch.rpm

yum install epel-release

yum install ceph-deploy python-setuptools python2-subprocess32

并配置镜像加速源

echo '
[Ceph]
name=Ceph packages for $basearch
baseurl=https://mirrors.tuna.tsinghua.edu.cn/ceph/rpm-mimic/el7/x86_64/
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://download.ceph.com/keys/release.asc

[Ceph-noarch]
name=Ceph noarch packages
# 官方源
#baseurl=http://download.ceph.com/rpm-mimic/el7/noarch
# 清华源
baseurl=https://mirrors.tuna.tsinghua.edu.cn/ceph/rpm-mimic/el7/noarch/
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://download.ceph.com/keys/release.asc

[ceph-source]
name=Ceph source packages
baseurl=https://mirrors.tuna.tsinghua.edu.cn/ceph/rpm-mimic/el7/SRPMS/
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://download.ceph.com/keys/release.asc' > /etc/yum.repos.d/ceph.repo

开放端口，非生产环境，可以直接禁用防火墙：

systemctl stop firewalld.service
systemctl disable firewalld.service

SELinux设为禁用：

setenforce 0

永久生效：编辑 vi /etc/selinux/config修改：

SELINUX=disabled

正式安装

ceph-deploy 工具安装；主节点安装：

yum update && yum -y install ceph ceph-deploy

也可通过如下方式安装：

mkdir -p /opt/ceph/ceph-cluster && cd /opt/ceph/ceph-cluster

创建集群；

ceph-deploy new node00  node01 node02

会生成配置文件；

vi /opt/ceph/ceph-cluster/ceph.conf

[global]
fsid = 7d75db39-d457-4764-b7d2-1b48645b2781
mon_initial_members = linux30, linux31, linux32
mon_host = 192.168.10.30,192.168.10.31,192.168.10.32
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx

# 公网网络
public network = 192.168.247.100/24
# 设置pool池默认分配数量 默认副本数为3
osd pool default size = 2
# 容忍更多的时钟误差
mon clock drift allowed = 2
mon clock drift warn backoff = 30
# 允许删除pool
mon_allow_pool_delete = true
[mgr]
# 开启WEB仪表盘
mgr modules = dashboard

public network是其公网IP（虚拟机是vmnet8的网卡IP）

节点部署

ceph-deploy install  node00  node01 node02 --no-adjust-repos

--no-adjust-repos使用该命令可以实现加速效果；并且不改变镜像源。

初始monitor信息：

ceph-deploy mon create-initial
## ceph-deploy --overwrite-conf mon create-initial

执行完之后，本地目录下会生成若干keyring结尾的密钥文件；如下图：

同步管理信息

ceph-deploy admin  node00  node01 node02

[root@node00 ceph-cluster]# ceph-deploy admin  node00  node01 node02
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO  ] Invoked (2.0.1): /usr/bin/ceph-deploy admin node00 node01 node02
[ceph_deploy.cli][INFO  ] ceph-deploy options:
[ceph_deploy.cli][INFO  ]  username                      : None
[ceph_deploy.cli][INFO  ]  verbose                       : False
[ceph_deploy.cli][INFO  ]  overwrite_conf                : False
[ceph_deploy.cli][INFO  ]  quiet                         : False
[ceph_deploy.cli][INFO  ]  cd_conf                       : <ceph_deploy.conf.cephdeploy.Conf instance at 0x7f4b18579878>
[ceph_deploy.cli][INFO  ]  cluster                       : ceph
[ceph_deploy.cli][INFO  ]  client                        : ['node00', 'node01', 'node02']
[ceph_deploy.cli][INFO  ]  func                          : <function admin at 0x7f4b18e12230>
[ceph_deploy.cli][INFO  ]  ceph_conf                     : None
[ceph_deploy.cli][INFO  ]  default_release               : False
[ceph_deploy.admin][DEBUG ] Pushing admin keys and conf to node00
[node00][DEBUG ] connected to host: node00 
[node00][DEBUG ] detect platform information from remote host
[node00][DEBUG ] detect machine type
[node00][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[ceph_deploy.admin][DEBUG ] Pushing admin keys and conf to node01
[node01][DEBUG ] connection detected need for sudo
[node01][DEBUG ] connected to host: node01 
[node01][DEBUG ] detect platform information from remote host
[node01][DEBUG ] detect machine type
[node01][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[ceph_deploy.admin][DEBUG ] Pushing admin keys and conf to node02
[node02][DEBUG ] connection detected need for sudo
[node02][DEBUG ] connected to host: node02 
[node02][DEBUG ] detect platform information from remote host
[node02][DEBUG ] detect machine type
[node02][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[root@node00 ceph-cluster]# vim /etc/ceph/
ceph.client.admin.keyring  rbdmap                     tmphCOe3j
ceph.conf                  tmp4R_f2T                  
[root@node00 ceph-cluster]# vim /etc/ceph/
ceph.client.admin.keyring  rbdmap                     tmphCOe3j
ceph.conf                  tmp4R_f2T                  
[root@node00 ceph-cluster]# vim /etc/ceph/ceph.conf 
[root@node00 ceph-cluster]# clear
[root@node00 ceph-cluster]# ceph-deploy mgr create node00  node01 node02
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO  ] Invoked (2.0.1): /usr/bin/ceph-deploy mgr create node00 node01 node02
[ceph_deploy.cli][INFO  ] ceph-deploy options:
[ceph_deploy.cli][INFO  ]  username                      : None
[ceph_deploy.cli][INFO  ]  verbose                       : False
[ceph_deploy.cli][INFO  ]  mgr                           : [('node00', 'node00'), ('node01', 'node01'), ('node02', 'node02')]
[ceph_deploy.cli][INFO  ]  overwrite_conf                : False
[ceph_deploy.cli][INFO  ]  subcommand                    : create
[ceph_deploy.cli][INFO  ]  quiet                         : False
[ceph_deploy.cli][INFO  ]  cd_conf                       : <ceph_deploy.conf.cephdeploy.Conf instance at 0x7fcff90d9b00>
[ceph_deploy.cli][INFO  ]  cluster                       : ceph
[ceph_deploy.cli][INFO  ]  func                          : <function mgr at 0x7fcff99c9140>
[ceph_deploy.cli][INFO  ]  ceph_conf                     : None
[ceph_deploy.cli][INFO  ]  default_release               : False
[ceph_deploy.mgr][DEBUG ] Deploying mgr, cluster ceph hosts node00:node00 node01:node01 node02:node02
[node00][DEBUG ] connected to host: node00 
[node00][DEBUG ] detect platform information from remote host
[node00][DEBUG ] detect machine type
[ceph_deploy.mgr][INFO  ] Distro info: CentOS Linux 7.9.2009 Core
[ceph_deploy.mgr][DEBUG ] remote host will use systemd
[ceph_deploy.mgr][DEBUG ] deploying mgr bootstrap to node00
[node00][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[node00][WARNIN] mgr keyring does not exist yet, creating one
[node00][DEBUG ] create a keyring file
[node00][DEBUG ] create path recursively if it doesn't exist
[node00][INFO  ] Running command: ceph --cluster ceph --name client.bootstrap-mgr --keyring /var/lib/ceph/bootstrap-mgr/ceph.keyring auth get-or-create mgr.node00 mon allow profile mgr osd allow * mds allow * -o /var/lib/ceph/mgr/ceph-node00/keyring
[node00][INFO  ] Running command: systemctl enable ceph-mgr@node00
[node00][WARNIN] Created symlink from /etc/systemd/system/ceph-mgr.target.wants/ceph-mgr@node00.service to /usr/lib/systemd/system/ceph-mgr@.service.
[node00][INFO  ] Running command: systemctl start ceph-mgr@node00
[node00][INFO  ] Running command: systemctl enable ceph.target
[node01][DEBUG ] connection detected need for sudo
[node01][DEBUG ] connected to host: node01 
[node01][DEBUG ] detect platform information from remote host
[node01][DEBUG ] detect machine type
[ceph_deploy.mgr][INFO  ] Distro info: CentOS Linux 7.9.2009 Core
[ceph_deploy.mgr][DEBUG ] remote host will use systemd
[ceph_deploy.mgr][DEBUG ] deploying mgr bootstrap to node01
[node01][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[node01][WARNIN] mgr keyring does not exist yet, creating one
[node01][DEBUG ] create a keyring file
[node01][DEBUG ] create path recursively if it doesn't exist
[node01][INFO  ] Running command: sudo ceph --cluster ceph --name client.bootstrap-mgr --keyring /var/lib/ceph/bootstrap-mgr/ceph.keyring auth get-or-create mgr.node01 mon allow profile mgr osd allow * mds allow * -o /var/lib/ceph/mgr/ceph-node01/keyring
[node01][INFO  ] Running command: sudo systemctl enable ceph-mgr@node01
[node01][WARNIN] Created symlink from /etc/systemd/system/ceph-mgr.target.wants/ceph-mgr@node01.service to /usr/lib/systemd/system/ceph-mgr@.service.
[node01][INFO  ] Running command: sudo systemctl start ceph-mgr@node01
[node01][INFO  ] Running command: sudo systemctl enable ceph.target
[node02][DEBUG ] connection detected need for sudo
[node02][DEBUG ] connected to host: node02 
[node02][DEBUG ] detect platform information from remote host
[node02][DEBUG ] detect machine type
[ceph_deploy.mgr][INFO  ] Distro info: CentOS Linux 7.9.2009 Core
[ceph_deploy.mgr][DEBUG ] remote host will use systemd
[ceph_deploy.mgr][DEBUG ] deploying mgr bootstrap to node02
[node02][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[node02][WARNIN] mgr keyring does not exist yet, creating one
[node02][DEBUG ] create a keyring file
[node02][DEBUG ] create path recursively if it doesn't exist
[node02][INFO  ] Running command: sudo ceph --cluster ceph --name client.bootstrap-mgr --keyring /var/lib/ceph/bootstrap-mgr/ceph.keyring auth get-or-create mgr.node02 mon allow profile mgr osd allow * mds allow * -o /var/lib/ceph/mgr/ceph-node02/keyring
[node02][INFO  ] Running command: sudo systemctl enable ceph-mgr@node02
[node02][WARNIN] Created symlink from /etc/systemd/system/ceph-mgr.target.wants/ceph-mgr@node02.service to /usr/lib/systemd/system/ceph-mgr@.service.
[node02][INFO  ] Running command: sudo systemctl start ceph-mgr@node02
[node02][INFO  ] Running command: sudo systemctl enable ceph.target

安装mgr(管理守护进程)，大于12.x版本需安装，我们装的是最新版，需执行：

ceph-deploy mgr create node00  node01 node02

安装OSD(对象存储设备）并且完成挂载

fdisk -l查看加挂磁盘

加挂节点：

ceph-deploy osd create --data /dev/sdb node00
ceph-deploy osd create --data /dev/sdb node01
ceph-deploy osd create --data /dev/sdb node02

测试安装情况：

ceph-s

ceph config set mgr mgr/dashboard/server_addr 192.168.247.146
ceph config set mgr mgr/dashboard/server_port 18843

ceph config set mgr mgr/dashboard/server_addr node01

安装管理后台

开启dashboard模块

ceph mgr module enable dashboard

生成签名

ceph dashboard create-self-signed-cert

mkdir mgr-dashboard&&cd mgr-dashboard

[root@node00 mgr-dashboard]# pwd

/opt/ceph/ceph-cluster/mgr-dashboard

生成密钥对

cd  /opt/ceph/ceph-cluster/mgr-dashboard
openssl req -new -nodes -x509   -subj "/O=IT/CN=ceph-mgr-dashboard" -days 3650   -keyout dashboard.key -out dashboard.crt -extensions v3_ca

[root@linux30 mgr-dashboard]# ll

total 8

-rw-rw-r-- 1 ceph_user ceph_user 1155 Jul 14 02:26 dashboard.crt

-rw-rw-r-- 1 ceph_user ceph_user 1704 Jul 14 02:26 dashboard.key

启动dashboard

ceph mgr module disable dashboard
ceph mgr module enable dashboard

设置IP与PORT

ceph config set mgr mgr/dashboard/server_addr 192.168.247.146
ceph config set mgr mgr/dashboard/server_port 18843

关闭HTTPS

ceph config set mgr mgr/dashboard/ssl false

查看服务信息

[root@node00 ceph-cluster]# ceph mgr services
{
    "dashboard": "http://192.168.247.146:18843/"
}

ceph config set mgr mgr/dashboard/server_addr node00

设置管理用户与密码

ceph dashboard set-login-credentials admin admin

访问 http://192.168247.146:18843/

安装问题记录

`ceph -s`出现问题：

可能是时间同步问题，

ystemctl start ntpd     #新增的节点没有启动ntpd

systemctl  restart  ceph-mon.target

systemctl  restart  ceph-mon.target

`ceph-deploy mon`相关问题汇总：

ceph-deploy mon出现mon.node40 monitor is not yet in quorum, tries left: 5错误：

[root@node40 ceph-cluster]# ceph-deploy --overwrite-conf mon create-initial
[ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
[ceph_deploy.cli][INFO  ] Invoked (2.0.1): /usr/bin/ceph-deploy --overwrite-conf mon create-initial
[ceph_deploy.cli][INFO  ] ceph-deploy options:
[ceph_deploy.cli][INFO  ]  username                      : None
[ceph_deploy.cli][INFO  ]  verbose                       : False
[ceph_deploy.cli][INFO  ]  overwrite_conf                : True
[ceph_deploy.cli][INFO  ]  subcommand                    : create-initial
[ceph_deploy.cli][INFO  ]  quiet                         : False
[ceph_deploy.cli][INFO  ]  cd_conf                       : <ceph_deploy.conf.cephdeploy.Conf instance at 0x7fbd853c1f80>
[ceph_deploy.cli][INFO  ]  cluster                       : ceph
[ceph_deploy.cli][INFO  ]  func                          : <function mon at 0x7fbd8562c410>
[ceph_deploy.cli][INFO  ]  ceph_conf                     : None
[ceph_deploy.cli][INFO  ]  default_release               : False
[ceph_deploy.cli][INFO  ]  keyrings                      : None
[ceph_deploy.mon][DEBUG ] Deploying mon, cluster ceph hosts node40 node41 node42
[ceph_deploy.mon][DEBUG ] detecting platform for host node40 ...
[node40][DEBUG ] connection detected need for sudo
[node40][DEBUG ] connected to host: node40 
[node40][DEBUG ] detect platform information from remote host
[node40][DEBUG ] detect machine type
[node40][DEBUG ] find the location of an executable
[ceph_deploy.mon][INFO  ] distro info: CentOS Linux 7.9.2009 Core
[node40][DEBUG ] determining if provided host has same hostname in remote
[node40][DEBUG ] get remote short hostname
[node40][DEBUG ] deploying mon to node40
[node40][DEBUG ] get remote short hostname
[node40][DEBUG ] remote hostname: node40
[node40][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[node40][DEBUG ] create the mon path if it does not exist
[node40][DEBUG ] checking for done path: /var/lib/ceph/mon/ceph-node40/done
[node40][DEBUG ] create a done file to avoid re-doing the mon deployment
[node40][DEBUG ] create the init path if it does not exist
[node40][INFO  ] Running command: sudo systemctl enable ceph.target
[node40][INFO  ] Running command: sudo systemctl enable ceph-mon@node40
[node40][INFO  ] Running command: sudo systemctl start ceph-mon@node40
[node40][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node40.asok mon_status
[node40][DEBUG ] ********************************************************************************
[node40][DEBUG ] status for monitor: mon.node40
[node40][DEBUG ] {
[node40][DEBUG ]   "election_epoch": 1, 
[node40][DEBUG ]   "extra_probe_peers": [
[node40][DEBUG ]     {
[node40][DEBUG ]       "addrvec": [
[node40][DEBUG ]         {
[node40][DEBUG ]           "addr": "192.168.247.142:6789", 
[node40][DEBUG ]           "nonce": 0, 
[node40][DEBUG ]           "type": "v1"
[node40][DEBUG ]         }
[node40][DEBUG ]       ]
[node40][DEBUG ]     }, 
[node40][DEBUG ]     {
[node40][DEBUG ]       "addrvec": [
[node40][DEBUG ]         {
[node40][DEBUG ]           "addr": "192.168.247.141:3300", 
[node40][DEBUG ]           "nonce": 0, 
[node40][DEBUG ]           "type": "v2"
[node40][DEBUG ]         }, 
[node40][DEBUG ]         {
[node40][DEBUG ]           "addr": "192.168.247.141:6789", 
[node40][DEBUG ]           "nonce": 0, 
[node40][DEBUG ]           "type": "v1"
[node40][DEBUG ]         }
[node40][DEBUG ]       ]
[node40][DEBUG ]     }, 
[node40][DEBUG ]     {
[node40][DEBUG ]       "addrvec": [
[node40][DEBUG ]         {
[node40][DEBUG ]           "addr": "192.168.247.142:3300", 
[node40][DEBUG ]           "nonce": 0, 
[node40][DEBUG ]           "type": "v2"
[node40][DEBUG ]         }, 
[node40][DEBUG ]         {
[node40][DEBUG ]           "addr": "192.168.247.142:6789", 
[node40][DEBUG ]           "nonce": 0, 
[node40][DEBUG ]           "type": "v1"
[node40][DEBUG ]         }
[node40][DEBUG ]       ]
[node40][DEBUG ]     }
[node40][DEBUG ]   ], 
[node40][DEBUG ]   "feature_map": {
[node40][DEBUG ]     "mon": [
[node40][DEBUG ]       {
[node40][DEBUG ]         "features": "0x3ffddff8ffecffff", 
[node40][DEBUG ]         "num": 1, 
[node40][DEBUG ]         "release": "luminous"
[node40][DEBUG ]       }
[node40][DEBUG ]     ]
[node40][DEBUG ]   }, 
[node40][DEBUG ]   "features": {
[node40][DEBUG ]     "quorum_con": "0", 
[node40][DEBUG ]     "quorum_mon": [], 
[node40][DEBUG ]     "required_con": "0", 
[node40][DEBUG ]     "required_mon": []
[node40][DEBUG ]   }, 
[node40][DEBUG ]   "monmap": {
[node40][DEBUG ]     "created": "2022-04-08 14:14:20.855876", 
[node40][DEBUG ]     "epoch": 0, 
[node40][DEBUG ]     "features": {
[node40][DEBUG ]       "optional": [], 
[node40][DEBUG ]       "persistent": []
[node40][DEBUG ]     }, 
[node40][DEBUG ]     "fsid": "b3299c95-745f-467f-91e4-a3e30c490483", 
[node40][DEBUG ]     "min_mon_release": 0, 
[node40][DEBUG ]     "min_mon_release_name": "unknown", 
[node40][DEBUG ]     "modified": "2022-04-08 14:14:20.855876", 
[node40][DEBUG ]     "mons": [
[node40][DEBUG ]       {
[node40][DEBUG ]         "addr": "192.168.247.140:6789/0", 
[node40][DEBUG ]         "name": "node40", 
[node40][DEBUG ]         "public_addr": "192.168.247.140:6789/0", 
[node40][DEBUG ]         "public_addrs": {
[node40][DEBUG ]           "addrvec": [
[node40][DEBUG ]             {
[node40][DEBUG ]               "addr": "192.168.247.140:3300", 
[node40][DEBUG ]               "nonce": 0, 
[node40][DEBUG ]               "type": "v2"
[node40][DEBUG ]             }, 
[node40][DEBUG ]             {
[node40][DEBUG ]               "addr": "192.168.247.140:6789", 
[node40][DEBUG ]               "nonce": 0, 
[node40][DEBUG ]               "type": "v1"
[node40][DEBUG ]             }
[node40][DEBUG ]           ]
[node40][DEBUG ]         }, 
[node40][DEBUG ]         "rank": 0
[node40][DEBUG ]       }, 
[node40][DEBUG ]       {
[node40][DEBUG ]         "addr": "192.168.247.142:6789/0", 
[node40][DEBUG ]         "name": "node42", 
[node40][DEBUG ]         "public_addr": "192.168.247.142:6789/0", 
[node40][DEBUG ]         "public_addrs": {
[node40][DEBUG ]           "addrvec": [
[node40][DEBUG ]             {
[node40][DEBUG ]               "addr": "192.168.247.142:6789", 
[node40][DEBUG ]               "nonce": 0, 
[node40][DEBUG ]               "type": "v1"
[node40][DEBUG ]             }
[node40][DEBUG ]           ]
[node40][DEBUG ]         }, 
[node40][DEBUG ]         "rank": 1
[node40][DEBUG ]       }, 
[node40][DEBUG ]       {
[node40][DEBUG ]         "addr": "0.0.0.0:0/1", 
[node40][DEBUG ]         "name": "node41", 
[node40][DEBUG ]         "public_addr": "0.0.0.0:0/1", 
[node40][DEBUG ]         "public_addrs": {
[node40][DEBUG ]           "addrvec": [
[node40][DEBUG ]             {
[node40][DEBUG ]               "addr": "0.0.0.0:0", 
[node40][DEBUG ]               "nonce": 1, 
[node40][DEBUG ]               "type": "v1"
[node40][DEBUG ]             }
[node40][DEBUG ]           ]
[node40][DEBUG ]         }, 
[node40][DEBUG ]         "rank": 2
[node40][DEBUG ]       }
[node40][DEBUG ]     ]
[node40][DEBUG ]   }, 
[node40][DEBUG ]   "name": "node40", 
[node40][DEBUG ]   "outside_quorum": [
[node40][DEBUG ]     "node40"
[node40][DEBUG ]   ], 
[node40][DEBUG ]   "quorum": [], 
[node40][DEBUG ]   "rank": 0, 
[node40][DEBUG ]   "state": "probing", 
[node40][DEBUG ]   "sync_provider": []
[node40][DEBUG ] }
[node40][DEBUG ] ********************************************************************************
[node40][INFO  ] monitor: mon.node40 is running
[node40][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node40.asok mon_status
[ceph_deploy.mon][DEBUG ] detecting platform for host node41 ...
[node41][DEBUG ] connection detected need for sudo
[node41][DEBUG ] connected to host: node41 
[node41][DEBUG ] detect platform information from remote host
[node41][DEBUG ] detect machine type
[node41][DEBUG ] find the location of an executable
[ceph_deploy.mon][INFO  ] distro info: CentOS Linux 7.9.2009 Core
[node41][DEBUG ] determining if provided host has same hostname in remote
[node41][DEBUG ] get remote short hostname
[node41][DEBUG ] deploying mon to node41
[node41][DEBUG ] get remote short hostname
[node41][DEBUG ] remote hostname: node41
[node41][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[node41][DEBUG ] create the mon path if it does not exist
[node41][DEBUG ] checking for done path: /var/lib/ceph/mon/ceph-node41/done
[node41][DEBUG ] create a done file to avoid re-doing the mon deployment
[node41][DEBUG ] create the init path if it does not exist
[node41][INFO  ] Running command: sudo systemctl enable ceph.target
[node41][INFO  ] Running command: sudo systemctl enable ceph-mon@node41
[node41][INFO  ] Running command: sudo systemctl start ceph-mon@node41
[node41][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node41.asok mon_status
[node41][DEBUG ] ********************************************************************************
[node41][DEBUG ] status for monitor: mon.node41
[node41][DEBUG ] {
[node41][DEBUG ]   "election_epoch": 117, 
[node41][DEBUG ]   "extra_probe_peers": [], 
[node41][DEBUG ]   "feature_map": {
[node41][DEBUG ]     "mon": [
[node41][DEBUG ]       {
[node41][DEBUG ]         "features": "0x3ffddff8ffecffff", 
[node41][DEBUG ]         "num": 1, 
[node41][DEBUG ]         "release": "luminous"
[node41][DEBUG ]       }
[node41][DEBUG ]     ]
[node41][DEBUG ]   }, 
[node41][DEBUG ]   "features": {
[node41][DEBUG ]     "quorum_con": "0", 
[node41][DEBUG ]     "quorum_mon": [], 
[node41][DEBUG ]     "required_con": "2449958747315912708", 
[node41][DEBUG ]     "required_mon": [
[node41][DEBUG ]       "kraken", 
[node41][DEBUG ]       "luminous", 
[node41][DEBUG ]       "mimic", 
[node41][DEBUG ]       "osdmap-prune", 
[node41][DEBUG ]       "nautilus"
[node41][DEBUG ]     ]
[node41][DEBUG ]   }, 
[node41][DEBUG ]   "monmap": {
[node41][DEBUG ]     "created": "2022-04-08 14:02:08.362899", 
[node41][DEBUG ]     "epoch": 1, 
[node41][DEBUG ]     "features": {
[node41][DEBUG ]       "optional": [], 
[node41][DEBUG ]       "persistent": [
[node41][DEBUG ]         "kraken", 
[node41][DEBUG ]         "luminous", 
[node41][DEBUG ]         "mimic", 
[node41][DEBUG ]         "osdmap-prune", 
[node41][DEBUG ]         "nautilus"
[node41][DEBUG ]       ]
[node41][DEBUG ]     }, 
[node41][DEBUG ]     "fsid": "b3299c95-745f-467f-91e4-a3e30c490483", 
[node41][DEBUG ]     "min_mon_release": 14, 
[node41][DEBUG ]     "min_mon_release_name": "nautilus", 
[node41][DEBUG ]     "modified": "2022-04-08 14:02:08.362899", 
[node41][DEBUG ]     "mons": [
[node41][DEBUG ]       {
[node41][DEBUG ]         "addr": "192.168.247.141:6789/0", 
[node41][DEBUG ]         "name": "node41", 
[node41][DEBUG ]         "public_addr": "192.168.247.141:6789/0", 
[node41][DEBUG ]         "public_addrs": {
[node41][DEBUG ]           "addrvec": [
[node41][DEBUG ]             {
[node41][DEBUG ]               "addr": "192.168.247.141:6789", 
[node41][DEBUG ]               "nonce": 0, 
[node41][DEBUG ]               "type": "v1"
[node41][DEBUG ]             }
[node41][DEBUG ]           ]
[node41][DEBUG ]         }, 
[node41][DEBUG ]         "rank": 0
[node41][DEBUG ]       }, 
[node41][DEBUG ]       {
[node41][DEBUG ]         "addr": "192.168.247.142:6789/0", 
[node41][DEBUG ]         "name": "node42", 
[node41][DEBUG ]         "public_addr": "192.168.247.142:6789/0", 
[node41][DEBUG ]         "public_addrs": {
[node41][DEBUG ]           "addrvec": [
[node41][DEBUG ]             {
[node41][DEBUG ]               "addr": "192.168.247.142:6789", 
[node41][DEBUG ]               "nonce": 0, 
[node41][DEBUG ]               "type": "v1"
[node41][DEBUG ]             }
[node41][DEBUG ]           ]
[node41][DEBUG ]         }, 
[node41][DEBUG ]         "rank": 1
[node41][DEBUG ]       }, 
[node41][DEBUG ]       {
[node41][DEBUG ]         "addr": "0.0.0.0:0/1", 
[node41][DEBUG ]         "name": "node40", 
[node41][DEBUG ]         "public_addr": "0.0.0.0:0/1", 
[node41][DEBUG ]         "public_addrs": {
[node41][DEBUG ]           "addrvec": [
[node41][DEBUG ]             {
[node41][DEBUG ]               "addr": "0.0.0.0:0", 
[node41][DEBUG ]               "nonce": 1, 
[node41][DEBUG ]               "type": "v1"
[node41][DEBUG ]             }
[node41][DEBUG ]           ]
[node41][DEBUG ]         }, 
[node41][DEBUG ]         "rank": 2
[node41][DEBUG ]       }
[node41][DEBUG ]     ]
[node41][DEBUG ]   }, 
[node41][DEBUG ]   "name": "node41", 
[node41][DEBUG ]   "outside_quorum": [
[node41][DEBUG ]     "node41"
[node41][DEBUG ]   ], 
[node41][DEBUG ]   "quorum": [], 
[node41][DEBUG ]   "rank": 0, 
[node41][DEBUG ]   "state": "probing", 
[node41][DEBUG ]   "sync_provider": []
[node41][DEBUG ] }
[node41][DEBUG ] ********************************************************************************
[node41][INFO  ] monitor: mon.node41 is running
[node41][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node41.asok mon_status
[ceph_deploy.mon][DEBUG ] detecting platform for host node42 ...
[node42][DEBUG ] connection detected need for sudo
[node42][DEBUG ] connected to host: node42 
[node42][DEBUG ] detect platform information from remote host
[node42][DEBUG ] detect machine type
[node42][DEBUG ] find the location of an executable
[ceph_deploy.mon][INFO  ] distro info: CentOS Linux 7.9.2009 Core
[node42][DEBUG ] determining if provided host has same hostname in remote
[node42][DEBUG ] get remote short hostname
[node42][DEBUG ] deploying mon to node42
[node42][DEBUG ] get remote short hostname
[node42][DEBUG ] remote hostname: node42
[node42][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[node42][DEBUG ] create the mon path if it does not exist
[node42][DEBUG ] checking for done path: /var/lib/ceph/mon/ceph-node42/done
[node42][DEBUG ] create a done file to avoid re-doing the mon deployment
[node42][DEBUG ] create the init path if it does not exist
[node42][INFO  ] Running command: sudo systemctl enable ceph.target
[node42][INFO  ] Running command: sudo systemctl enable ceph-mon@node42
[node42][INFO  ] Running command: sudo systemctl start ceph-mon@node42
[node42][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node42.asok mon_status
[node42][ERROR ] admin_socket: exception getting command descriptions: [Errno 2] No such file or directory
[node42][WARNIN] monitor: mon.node42, might not be running yet
[node42][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node42.asok mon_status
[node42][ERROR ] admin_socket: exception getting command descriptions: [Errno 2] No such file or directory
[node42][WARNIN] monitor node42 does not exist in monmap
[ceph_deploy.mon][INFO  ] processing monitor mon.node40
[node40][DEBUG ] connection detected need for sudo
[node40][DEBUG ] connected to host: node40 
[node40][DEBUG ] detect platform information from remote host
[node40][DEBUG ] detect machine type
[node40][DEBUG ] find the location of an executable
[node40][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node40.asok mon_status
[ceph_deploy.mon][WARNIN] mon.node40 monitor is not yet in quorum, tries left: 5
[ceph_deploy.mon][WARNIN] waiting 5 seconds before retrying
[node40][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node40.asok mon_status
[ceph_deploy.mon][WARNIN] mon.node40 monitor is not yet in quorum, tries left: 4
[ceph_deploy.mon][WARNIN] waiting 10 seconds before retrying
[node40][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node40.asok mon_status
[ceph_deploy.mon][WARNIN] mon.node40 monitor is not yet in quorum, tries left: 3
[ceph_deploy.mon][WARNIN] waiting 10 seconds before retrying
[node40][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node40.asok mon_status
[ceph_deploy.mon][WARNIN] mon.node40 monitor is not yet in quorum, tries left: 2
[ceph_deploy.mon][WARNIN] waiting 15 seconds before retrying
[node40][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node40.asok mon_status
[ceph_deploy.mon][WARNIN] mon.node40 monitor is not yet in quorum, tries left: 1
[ceph_deploy.mon][WARNIN] waiting 20 seconds before retrying
[ceph_deploy.mon][INFO  ] processing monitor mon.node41
[node41][DEBUG ] connection detected need for sudo
[node41][DEBUG ] connected to host: node41 
[node41][DEBUG ] detect platform information from remote host
[node41][DEBUG ] detect machine type
[node41][DEBUG ] find the location of an executable
[node41][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node41.asok mon_status
[ceph_deploy.mon][WARNIN] mon.node41 monitor is not yet in quorum, tries left: 5
[ceph_deploy.mon][WARNIN] waiting 5 seconds before retrying
[node41][INFO  ] Running command: sudo ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.node41.asok mon_status
[ceph_deploy.mon][WARNIN] mon.node41 monitor is not yet in quorum, tries left: 4
[ceph_deploy.mon][WARNIN] waiting 10 seconds before retrying

错误的含义是：mon.node40 监视器尚未达到仲裁状态，经过多轮尝试后失败。

网络参考可能原因：

防火墙：
hosts配置和hostname 不一致
public_network配置问题

一些其他的文档说明是地址是 public_network如下图：

[分布式存储]Ceph环境部署失败问题总结

这篇关于Ceph集群搭建记录的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！

C/C++教程