Java教程

vtk绘制连接线

本文主要是介绍vtk绘制连接线,对大家解决编程问题具有一定的参考价值,需要的程序猿们随着小编来一起学习吧!

vtkPolyLine时可以一次设置多个点再连接成一段:

vtkSmartPointer<vtkPolyLine> polyLine=
    vtkSmartPointer<vtkPolyLine>::New();
  polyLine->GetPointIds()->SetNumberOfIds(5);
  for(unsignedint i = 0; i< 5; i++)
    {
    polyLine->GetPointIds()->SetId(i,i);
    }

用vtkLine连接多点成线段时,一次只能连接两个点:

for(unsignedint i = 0; i< 3; i++)
    {
    vtkSmartPointer<vtkLine> line=
      vtkSmartPointer<vtkLine>::New();
    line->GetPointIds()->SetId(0,i);
    line->GetPointIds()->SetId(1,i+1);
    lines->InsertNextCell(line);
    }

用vtkLineSource时一次也只能指定两个点,也可以一次性指定多个点,根据点的插入顺序来连接成线段:

vtkSmartPointer<vtkLineSource> lineSource=
    vtkSmartPointer<vtkLineSource>::New();
  lineSource->SetPoint1(p0);
  lineSource->SetPoint2(p1);
  lineSource->Update();

vtkSmartPointer<vtkLineSource> lineSource =

        vtkSmartPointer<vtkLineSource>::New();
      //lineSource->SetPoint1(p0);
      //lineSource->SetPoint2(p1);
      double origin[3] = {0.0, 0.0, 0.0};
        double p0[3] = {1.0, 0.0, 0.0};
        double p1[3] = {0.0, 1.0, 0.0};
        double p2[3] = {0.0, 1.0, 2.0};
        double p3[3] = {1.0, 2.0, 3.0};
        // Create a vtkPoints object and store the points in it
        vtkSmartPointer<vtkPoints> points =
          vtkSmartPointer<vtkPoints>::New();
        points->InsertNextPoint(origin);
        points->InsertNextPoint(p0);
        points->InsertNextPoint(p1);
        points->InsertNextPoint(p2);
        points->InsertNextPoint(p3);
        lineSource->SetPoints(points);
      lineSource->Update();
————————————————
版权声明:本文为CSDN博主「zhuiyuan2012」的原创文章,遵循CC 4.0 BY-SA版权协议,转载请附上原文出处链接及本声明。
原文链接:https://blog.csdn.net/zhuiyuanzhongjia/article/details/51800591

这篇关于vtk绘制连接线的文章就介绍到这儿,希望我们推荐的文章对大家有所帮助,也希望大家多多支持为之网!