Java教程
Java中Runnable和Thread的区别（网上部分说法是错误的）
本文主要是介绍Java中Runnable和Thread的区别（网上部分说法是错误的），对大家解决编程问题具有一定的参考价值，需要的程序猿们随着小编来一起学习吧！
在实际工作中，我们很可能习惯性地选择Runnable或Thread之一直接使用，根本没在意二者的区别，但在面试中很多面试官会经常而且非常严肃的问出：请你解释下Runnable或Thread的区别？尤其是新手就容易上当，不知如何回答，就胡乱编一通。鄙人今天告诉你们这二者本身就没有本质区别，就是接口和类的区别。如果非要说区别，请看如下：
- Runnable的实现方式是实现其接口即可
- Thread的实现方式是继承其类
- Runnable接口支持多继承，但基本上用不到
- Thread实现了Runnable接口并进行了扩展，而Thread和Runnable的实质是实现的关系，不是同类东西，所以Runnable或Thread本身没有可比性。
网络上流传的最大的一个错误结论：Runnable更容易可以实现多个线程间的资源共享，而Thread不可以！ 这是一个错误的结论！
我们假定一个场景，分3个窗口（线程）买10张票：
一、实现Runnable接口
package com.neonuu.collection.domain;
public class RunnableTest {
static class MyRunnable implements Runnable{
//共购买10张票
private int ticket = 10;
@Override
public void run() {
//实现Runnable接口
for(int i=0;i<10;i++){
//利用synchronized锁，实现同步，防止超卖
synchronized(this){
if(this.ticket>0){
try {
System.out.println(Thread.currentThread().getName()+"购票前剩余:"+this.ticket);
ticket--;
System.out.println(Thread.currentThread().getName()+"购票后剩余:"+this.ticket);
System.out.println("================");
Thread.sleep(100);
} catch (InterruptedException e) {
e.printStackTrace();
}
}else {
break;
}
}
}
}
}
public static void main(String[] args){
//实现Runnable接口，3个线程同时购买10张票
MyRunnable myRunable = new MyRunnable();
Thread myRunnable1 = new Thread(myRunable,"myRunnable1");
Thread myRunnable2 = new Thread(myRunable,"myRunnable2");
Thread myRunnable3 = new Thread(myRunable,"myRunnable3");
myRunnable1.start();
myRunnable2.start();
myRunnable3.start();
}
}
结果如下：
myRunnable1购票前剩余:10 myRunnable1购票后剩余:9 ================ myRunnable3购票前剩余:9 myRunnable3购票后剩余:8 ================ myRunnable3购票前剩余:8 myRunnable3购票后剩余:7 ================ myRunnable2购票前剩余:7 myRunnable2购票后剩余:6 ================ myRunnable3购票前剩余:6 myRunnable3购票后剩余:5 ================ myRunnable1购票前剩余:5 myRunnable1购票后剩余:4 ================ myRunnable1购票前剩余:4 myRunnable1购票后剩余:3 ================ myRunnable3购票前剩余:3 myRunnable3购票后剩余:2 ================ myRunnable2购票前剩余:2 myRunnable2购票后剩余:1 ================ myRunnable2购票前剩余:1 myRunnable2购票后剩余:0 ================
二、继承Thread
package com.neonuu.collection.domain;
public class ThreadTest {
static class MyThread extends Thread {
//共购买10张票
private int ticket = 10;
public void run(){
//继承Thread类
for(int i=0;i<10;i++){
//利用synchronized锁，实现同步，防止超卖
synchronized(this){
if(this.ticket>0){
try {
System.out.println(Thread.currentThread().getName()+"购票前剩余:"+this.ticket);
ticket--;
System.out.println(Thread.currentThread().getName()+"购票后剩余:"+this.ticket);
System.out.println("================");
Thread.sleep(100);
} catch (InterruptedException e) {
e.printStackTrace();
}
}else {
break;
}
}
}
}
}
public static void main(String[] args){
//方法一：创建3个MyThread实例
//网上多数采用此方法，来证明Thread与Runnable在资源共享上的区别，其实是错误的
//结果：3个线程各买了10张票，共30张票
MyThread myThread1 = new MyThread();
MyThread myThread2 = new MyThread();
MyThread myThread3 = new MyThread();
myThread1.start();
myThread2.start();
myThread3.start();
//方法二：创建1个MyThread实例，开启3个线程
//结果：与继承Runnable相同，3个线程同时购买10张票
MyThread myThread = new MyThread();
Thread myThread4 = new Thread(myThread,"myThread1");
Thread myThread5 = new Thread(myThread,"myThread2");
Thread myThread6 = new Thread(myThread,"myThread3");
myThread4.start();
myThread5.start();
myThread6.start();
}
}
在main方法中我们使用两种写法
1、方法一的结果：
Thread-0购票前剩余:10 Thread-0购票后剩余:9 Thread-2购票前剩余:10 Thread-1购票前剩余:10 Thread-2购票后剩余:9 ================ ================ Thread-1购票后剩余:9 ================ Thread-1购票前剩余:9 Thread-0购票前剩余:9 Thread-2购票前剩余:9 Thread-1购票后剩余:8 ================ Thread-2购票后剩余:8 ================ Thread-0购票后剩余:8 ================ Thread-0购票前剩余:8 Thread-0购票后剩余:7 ================ Thread-2购票前剩余:8 Thread-2购票后剩余:7 ================ Thread-1购票前剩余:8 Thread-1购票后剩余:7 ================ Thread-2购票前剩余:7 Thread-0购票前剩余:7 Thread-1购票前剩余:7 Thread-0购票后剩余:6 ================ Thread-1购票后剩余:6 ================ Thread-2购票后剩余:6 ================ Thread-0购票前剩余:6 Thread-2购票前剩余:6 Thread-1购票前剩余:6 Thread-2购票后剩余:5 ================ Thread-0购票后剩余:5 ================ Thread-1购票后剩余:5 ================ Thread-1购票前剩余:5 Thread-1购票后剩余:4 ================ Thread-0购票前剩余:5 Thread-0购票后剩余:4 ================ Thread-2购票前剩余:5 Thread-2购票后剩余:4 ================ Thread-2购票前剩余:4 Thread-2购票后剩余:3 ================ Thread-0购票前剩余:4 Thread-0购票后剩余:3 ================ Thread-1购票前剩余:4 Thread-1购票后剩余:3 ================ Thread-1购票前剩余:3 Thread-1购票后剩余:2 ================ Thread-0购票前剩余:3 Thread-0购票后剩余:2 ================ Thread-2购票前剩余:3 Thread-2购票后剩余:2 ================ Thread-2购票前剩余:2 Thread-2购票后剩余:1 ================ Thread-0购票前剩余:2 Thread-0购票后剩余:1 ================ Thread-1购票前剩余:2 Thread-1购票后剩余:1 ================ Thread-2购票前剩余:1 Thread-2购票后剩余:0 ================ Thread-0购票前剩余:1 Thread-0购票后剩余:0 ================ Thread-1购票前剩余:1 Thread-1购票后剩余:0 ================
可以看出，方法一分三个线程分别购买了10张票，共购买了30张。这个结果并不是我们想要的。网上大部分是通过这个来证明Thread不能资源共享，是错误的！
2、方法二的结果
myThread1购票前剩余:10 myThread1购票后剩余:9 ================ myThread3购票前剩余:9 myThread3购票后剩余:8 ================ myThread2购票前剩余:8 myThread2购票后剩余:7 ================ myThread3购票前剩余:7 myThread3购票后剩余:6 ================ myThread1购票前剩余:6 myThread1购票后剩余:5 ================ myThread3购票前剩余:5 myThread3购票后剩余:4 ================ myThread2购票前剩余:4 myThread2购票后剩余:3 ================ myThread3购票前剩余:3 myThread3购票后剩余:2 ================ myThread1购票前剩余:2 myThread1购票后剩余:1 ================ myThread1购票前剩余:1 myThread1购票后剩余:0 ================
可以看出，这个结果与Runnable是相同的，3个线程共同购买10张票
注：synchronized这个关键字是必须的，否则会发生超买，买了11张票，ticket变为负数。
三、结论：
事实是Thread和Runnable没有本质的区别，只是写法不同罢了，，这才是正确的结论，与资源共享无关！
这篇关于Java中Runnable和Thread的区别（网上部分说法是错误的）的文章就介绍到这儿，希望我们推荐的文章对大家有所帮助，也希望大家多多支持为之网！
您可能喜欢
-
[开源]10.3K+ Star！轻量强大的开源运维平台，超赞！11-22
-
Flutter基础教程：新手入门指南11-21
-
Flutter跨平台教程：新手入门详解11-21
-
Flutter跨平台教程：新手入门与实践指南11-21
-
Flutter列表组件教程：初学者指南11-21
-
Flutter列表组件教程：新手入门指南11-21
-
Flutter入门教程：初学者必看指南11-21
-
Flutter入门教程：从零开始的Flutter开发指南11-21
-
Flutter升级教程：新手必读的升级指南11-21
-
Flutter升级教程：轻松掌握Flutter版本更新11-21
-
Flutter适配教程：轻松掌握屏幕适配技巧11-21
-
Flutter数据存储教程：入门级详解与实战11-21
-
Flutter数据存储教程：轻松入门数据存储11-21
-
Flutter网络编程教程：新手入门必读11-21
-
Flutter网络编程教程：新手入门指南11-21
栏目导航
