粘包

只有tcp协议才会发送粘包,udp不会发生。发送端发送数据,接收端不知道应该如何去接收,造成的一种数据混乱的现象

import subprocess
r = subprocess.Popen('ls',shell=True,stdout=subprocess.PIPE,stderr=subprocess.PIPE)
# subprocess.Popen(cmd,shell=True,subprocess.stdout,subprocess.stderr)
# cmd : 代表系统命令
# shell = True   代表这条命令是 系统命令,告诉操作系统,将cmd当成系统命令去执行
# stdout   是执行完系统命令之后,用于保存结果的一个管道
# stderr   是执行完系统命令之后,用于保存错误结果的一个管道
stdout = r.stdout.read().decode('gbk')
stderr = r.stderr.read().decode('gbk')
print('正确的返回结果:',stdout)
print('错误的返回结果:',stderr)
print('错误的返回结果:',stderr)

客户端发送要执行命令

服务器执行,执行完将结果返回给客户端

客户端拿到结果呈现到用户眼前

服务端

import socket
import subprocess

sk = socket.socket()
sk.bind(('127.0.0.1', 8080))
sk.listen()

conn, addr = sk.accept()
while 1:
    cmd = conn.recv(1024).decode('utf-8')
    r = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
    stdout = r.stdout.read()
    stderr = r.stderr.read()
    if stderr:
        conn.send(stderr)
    else:
        conn.send(stdout)

conn.close()
sk.close()

客户端

import socket

sk = socket.socket()
sk.connect_ex(('127.0.0.1', 8080))
while 1:
    cmd = input('请输入一个命令>>>')
    sk.send(cmd.encode('utf-8'))
    result = sk.recv(102)
    result = result.decode('gbk')
    print(result)

sk.close()

socket 实现 ssh

a = '邹'
print(len(a))  # 1
print(len(a.encode()))  # 3  转换为bytes一个汉字三个字符

客户端

import socket

client = socket.socket()
client.connect(('localhost', 9999))
while True:
    msg = input(">>:").strip()
    if len(msg) == 0:  # 输入的为空
        continue
    client.send(msg.encode("utf-8"))
    data = client.recv(1024)
    print("recv:", data.decode())
client.close()

服务端

import socket, os

server = socket.socket()
server.bind(('localhost', 9999))
server.listen()
while True:
    conn, addr = server.accept()
    print('new conn', addr)
    while True:
        data = conn.recv(1024)
        if not data:
            print('客户端已断开')
            break
        print('执行指令：', data)
        cmd_res = os.popen(data.decode()).read()  # 执行输入的命令，decode转换为字符串
        if len(cmd_res) == 0:
            cmd_res = 'cmd has no out'
        conn.send(cmd_res.encode('utf-8'))  # 转为utf-8发过去

当我们在客户端执行 ifconfig 命令时，第一次返回的不全（1024字节），在执行 ls 命令时，返回的是 ifconfig 剩下的命令（1024字节），如下

>>:ifconfig
recv: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
    inet 127.0.0.1 netmask 0xff000000 
    inet6 ::1 prefixlen 128 
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
    nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
ap1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
    options=400<CHANNEL_IO>
    ether b2:9c:4a:c4:34:e7 
    media: autoselect
    status: inactive
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=400<CHANNEL_IO>
    ether 90:9c:4a:c4:34:e7 
    inet6 fe80::18f2:9b2f:4496:675e%en0 prefixlen 64 secured scopeid 0x6 
    inet 192.168.31.110 netmask 0xffffff00 broadcast 192.168.31.255
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    options=400<CHANNEL_IO>
    ether 02:9c:4a:c4:34:e7 
    media: autoselect
    status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
    opti
>>:ls
recv: ons=400<CHANNEL_IO>
    ether e2:3f:ba:ac:28:1d 
    inet6 fe80::e03f:baff:feac:281d%awdl0 prefixlen 64 scopeid 0x8 
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
llw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=400<CHANNEL_IO>
    ether e2:3f:ba:ac:28:1d 
    inet6 fe80::e03f:baff:feac:281d%llw0 prefixlen 64 scopeid 0x9 
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=460<TSO4,TSO6,CHANNEL_IO>
    ether 1e:66:6c:14:0d:c4 
    media: autoselect <full-duplex>
    status: inactive
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=460<TSO4,TSO6,CHANNEL_IO>
    ether 1e:66:6c:14:0d:c5 
    media: autoselect <full-duplex>
    status: inactive
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=460<TSO4,TSO6,CHANNEL_IO>
    ether 1e:66:6c:14:0d:c1 
    media: autoselect <full-duplex>
    status: inactive
en4: flags=8963<U

全部接收

先判断需要接收的数据，然后接收的和实际的对比，如果小于实际的，继续接收，否则，打印出接收的大小和命令

客户端

import socket

client = socket.socket()
client.connect(('localhost', 9999))
while True:
    msg = input(">>:").strip()
    if len(msg) == 0:
        continue
    client.send(msg.encode("utf-8"))
    data_size = client.recv(1024)  # 接收命令的长度
    print('需要接收的数据大小：', data_size)
    client.send('开始发吧'.encode('utf-8'))  # 处理黏包
    reve_size = 0
    reve_data = b''
    while reve_size < int(data_size.decode()):  # data_size是byte类型
        data = client.recv(1024)
        reve_size += len(data)  # 每次收到的有可能小于1024，所以必须用len判断
        reve_data += data
    else:
        print('接收到的大小：', reve_size)
        print(reve_data.decode())
client.close()

服务端

import socket, os

server = socket.socket()
server.bind(('localhost', 9999))
server.listen()
while True:
    conn, addr = server.accept()
    print('new conn', addr)
    while True:
        print('等待新指令')
        data = conn.recv(1024)
        if not data:
            print('客户端已断开')
            break
        print('执行指令：', data)
        cmd_res = os.popen(data.decode()).read()  # 执行输入的命令，decode转换为字符串
        print('数据的大小：', len(cmd_res))
        if len(cmd_res) == 0:
            cmd_res = 'cmd has no out'
        conn.send(str(len(cmd_res.encode())).encode('utf-8'))  # 数字不能encode。cmd_res.encode()将汉字转换成3个字节，不转发送的大小和接收的大小不一样
        conn.recv(1024)  # 处理黏包
        conn.send(cmd_res.encode('utf-8'))  # 转为 utf-8发过去